That328i
-
Posts
23 -
Joined
-
Last visited
That328i's Achievements
Newbie (1/14)
0
Reputation
-
Edit fixed the no crank issue after rechecking plugs. Car fires up and runs. Set to m52 trigger as well. Thank you for all your help!
-
Okay so I ended up needing a new engine harness, swapped the engine harness around and now have cam signal. But some how lost crank signal
-
Okay I’ll order a brand new sensor and see how it goes. And I’ll change that to m52 trigger mode
-
Set to none car fired and shut off 100% better just need to idle now. Also I have rpm signal now
-
log file 2.llg BMW E36 G4+ provided basemap.pclr log and basemap currently being used
-
I pulled coil packs and grounded them. I have no spark at crank. I know my grounds good while testing because I turned the coil pack in in test mode and it worked.
-
okay so i have a known good cam sensor in the car now. Scope looks better to me. still not remotely trying to start tho. Trigger Scope Log 3.llg also i noticed when cranking and watching pclink im not getting and rpm input
-
I forgot to mention, my cams are retarded/advanced. I take is advanced 2 degrees and exhaust is retarded 8 degrees. Could it be to far out for the basemap to let it run?
-
I’ll try again but it wasn’t even trying to start
-
It seems that I won’t be able to get a new m50vanos cam sensor for atleast 4 days. Does an m52 sensor work my chance? Or can I get it to work?
-
yes i have, ill try and locate a new sensor
-
updated basemap to links provided version with is untouched attached is log requested Trigger Scope Log 2.llg
-
Yes will update when I get back home.
-
Trigger Scope Log 2021-03-25 6;06;04 pm.llg Log 2021-03-25 6;10;03 pm.llg im running the basemap provided by link, only change was i changed trigger wheel to m52 to match my motor, there was not change when using it on multitooth and base setting
-
No I haven’t. We’re can I find that function?