Josete

Hello, okay Adam, thank you very much, I reinstalled the last update to the ecu and I didn't miss the Aux 6 again, I was trying it and well, great then, less red lights on the PC!

Hello, I don't quite understand what you want to explain to me Adam, the translator may be the problem. In Aux 6 I have nothing connected, it is turned off I have not yet gone out to test on the road, the Aux 6 error was appearing and disappearing intermittently. And about the Database error, what could it be due to? Attached image .

Hello, I just checked and I have the last one in the ECU, 6.23.6 I reinstalled again and I will go out to test the Aux6 error, the Database error is still present fixed

Hello, thank you very much, now I confirm which one I have installed, but I think I am aware of the latest release.

Hola I have ecu G4X V10 in a 2006 subaru (EJ257) and I see a fairly continuous intermittent failure in Aux6, and looked at electrical schematics and there is nothing assigned in that Auxiliary. I also get the Database error fixed in states, this error has been reflected in states for quite some time. I try to find a problem in the vehicle that it is difficult to go up in revolutions, the revolutions go up very very slowly, I thought it would be a turbo blown configuration problem, but it is not a turbo problem, and totally modified the turbo management in several ways and the problem persists. Could someone help me solve these 2 mistakes? Attached image

Hello very thank Adam These days I'm changing what you're telling me, thank you

Hola, tengo problemas para ajustar el objetivo del turbo, instalé una válvula de descarga externa de 45 mm, no puedo configurar correctamente la mesa de la válvula de descarga, tengo muchas oscilaciones. Tengo una combinacion de springs instalados 24 psi = 1,65 bar. Intenté conectar el turbo directamente a la válvula de descarga y me da un soplo perfecto constante pero a 1,3 bar. no entiendo porque Doy esta información porque es una duda que yo también tengo. adjunto mi rom y el log muchas gracias socios A POLLA GORDA.pclx Registro en PC - 2023-02-19 8;49;33 pm.llgx

hola, el problema de la congelación fue mi culpa, como dije antes no soy un experto, me gusta hacer registros viendo el gráfico de tiempo en vivo, creo que agregué más parámetros para registrar causando una falla en el procesamiento de la PC/ECU. Siempre había registrado parámetros y solo con la actualización de Fireware agregaría algunos parámetros más que provocarían la congelación. El soporte técnico José María de Chile me ayudó por teléfono sin problemas. Gracias a todo el equipo de Link por la rapidez

thanks Adam. The ecu is G4X new from May 2021, old? old would be a G4+ ecu, right? I will review everything you have told me and I will write to Link. Thank you

hello Thank you I have last update attached image Today I will test the connection with another PC

Hello I have freezing problems due to disconnection with the ecu when making recordings with high engine load, and I have observed in States an error of "Database Error; Settings Overflow" and Database ID error 1144 I can't find precise information about what it means. Could it make some sense with my disconnection with high loads when I make recordings? Is it possible that it happens because I have many parameters recording? Attached screenshots Thanks guys sorry new screenshot

In case it helps, I had to turn off Lambda CL because looking at the AFR I was decreasing fuel in the Long-term settings table when I really needed to increase fuel, and every time it was working with poorer AFR causing driving failures

Hello When I update fireware I do not make any changes to my map, all the tables appear the same to me, in connection settings I think they also appear the same. I have tried a new added ground and the same speed failure continues, my PC USB updates have been checked and they seem to have the most recent ones. I still have to test with another PC. After all this, I would have to replace spark plugs, I think. Thank you for your interest, guys

Thank Adam Let's see what the technicians can tell you about that USB update, thank you very much. Yes, I have a good tuner friend, I will ask you to connect us with your PC. Muchas gracias por very fast answer!

hello, it only worked for a short time, I keep having problems recording, I notice that when I start recording, the communication speed is around 20-25hz, after approximately 10 seconds, the speed drops to around 7hz and with a knife engine load my communication freezes, losing connection with Link. I see in the recording the same parameters as with previous fireware, about 11-13 parameters. If I start accelerating at the beginning of activating the recording, it gives me time to make the recording. It happens to me since I updated the fireware, and tried to install old fireware but PC Link does not recognize the maps to open, I have been reprogramming for a short time, I still lack domain experience. I need help please .