Hiya,
Trying to do the first start on my Subaru Impreza V3/4 PNP ecu.
Brief spec -
2.1 stroker engine, with AVCS.
Using a newage crank trigger wheel, 2 wire cam sensors. JTinnovation expansion loom for the solenoids etc all wired to the expansion loom on the link.
Oil press, temp, water temp, IAT, Link can wideband, and 4 bar map sensor, 3 port boost solenoid.
I have put a base map on and altered the settings to suit where i think they need to be.
I can test the injectors using the test function and they work correctly, but the ECU will not enable them when trying to start.
Ignition test does not appear to work, but I beleive this to be an ECU issue as i have tested continuity from the coils back to the ECU and it bells out okay? I have attached a log and my map, hopefully someone has some ideas!
initial-new-2.pclr
Log 2021-04-17 11;09;01 am.llg