jsbsti

Hello, I have error code 54 Excess Pump Current on Link LBDA. Do you need to change the sensor?

Hello I made a log where I don't hear knock but the knock sensor oem detects knock I attach two captures, I only have this problem at the 85. Should it be set the knock thershold different for the 85?

Hello, I am going to install a lamdda link can on subaru ej 207, but my vehicle has an exhaust pressure sensor on the exhaust manifold and my lambda sensor is on down pipe. My question is will lambda link take into account the pressure and make a compensation?

Hello, is it possible to use Closed Loop Pressure Control on the fuel pump control on Subaru V8?

Is it possible to control the alternator? @Adamw

Hello, I have the alternator voltage that drops, do you think that the alternator is tired or that it is the regulator that is too slow? On subaru ej 207.

Here are two tests the first in 100Hz and the second in 250Hz original controller Subaru EJ 207.

AEM 340lph.

Hi, overall we set on which PWM frequency the fuel pump?

if I understood correctly if I set to 8k it will only take the frequencies around 8K ie from 7.5k to 8.5k? @Adamw

Here is my spectrograph @Adamw

Hello, on my Subaru EJ 207 the knock frequency is around 7.5kHz, how should I set the channel frequency to 7khz or 8kHz?

Hello, do you have any idea what frequency is used in the knock control for a ej 207 subaru? I settled on the 13KHZ freq as indicated on the help file, I wonder if it is more interesting to set it on the 10-16KHZ -wide band freq?

Hello I have a g4x plug in on subaru V8 it is necessary to pass the Stroboscopic lamp?

Thanks for the explanation @Adamw. The temperature charge is adjusted after calibrating the VE?