Jump to content

pagie84a

Members
  • Posts

    16
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

pagie84a's Achievements

  1. Was a fuel pressure issue it starts and runs now thankyou gor your help
  2. I assumed that was calibration issue as the oil press is same sensor and showing same results Ill check lines and pump
  3. Yes all 8 Tried flipping the trigger offset round 360 but same result
  4. ok finally got back round to this: base timing was out has been set with timing light, will start with aerostart now but not getting fuel. has fuel pressure at the rail attached fresh cranking log and base map new log.llg new tune.pclr
  5. have loaded fuel table and attempted at -356 still no love new log and tune attached log 3.llg tune with 360 trig offset.pclr
  6. Has spark, mustve been gap as you said. Still wont fire
  7. Screwdriver in the end of the coil grounding on the block, big ol spark on test none when cranking
  8. Whipped out the ol multimeter for a bit Coils have 12v constantly, coil trig have continuity to each other and negative when the ign is turned on and while cranking
  9. Not too stressed about fuel right now just wanna get it running and ill send it off for a tune, has fuel pressure at the rail and injectors test fired Ok ill have a look tomorrow rekon your onto something here might power the coil relay direct to battery for now
  10. Yes big ol spark on test nothing on crank
  11. trig 2 changed to cam pulse x1 no change fresh log and copy of changed map log 2.llg tune 2.pclr
  12. Mustve forgot to store after changing ill fix then load another log
  13. hopefully ive done this right log.llg
  14. have attached the tune will attempt to get a cranking log over the weekend tune.pclr
  15. Thankyou for the suggestion still no luck tho
×
×
  • Create New...