mortenkapi
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Downloads
Posts posted by mortenkapi
-
-
8 minutes ago, Adamw said:
Thanks, its get blinking and everything, but not any values.. i havent download any software to the iq3 but it had go with the link before i got it, its it nessesary to get newcthen?
the picture its im my car
My can setup
-
13 minutes ago, Adamw said:
Thanks! I have the G4+ extreme, And what im see its i have 2can setup. i have the 230-VM-EFILINKC. But i have to round contactor in the ecu, ond for the PC and one for the canbus?
-
17 hours ago, Adamw said:
As above, for the old racepak you will need the 230-VM-EFIUCAN VNet module to connect to the ecu.
I have it, Its the iq3 connectet in the same as the PC cable? And what should i type in the can1 setups?
-
Im bumping this, im also have the dutch8 connector, does i have to download the software with pc and then connect to the G4+ with can1 and its pnp?
Configuring CAN BUS setting for g4+ to Racepak iq3
in G4+
Posted
Very very thank you Adamw, i will download the iq3 software tommorow and try to adjust it...