anndrew0

hey mate got a chance to have a look at the car again. how's this trigger scope look. The rpm comes on for a little bit but drops off. Still dont have any spark while cranking. Cheers soarer latest.pclx TriggerScopeLog latest.llgx

before, i need to check the wiring again tho. ill check it and get back to you. Cheers

Got the injector test to work. had a look on my trigger scope and im only getting 0.2v. This is just noise isnt it? would you know if the ge distributer wiring to the ecu should be NE Trig 1 - B27 G1 Trig 2 - B25 G- Ground trig 1 is 12 tooth 1 sync for crank trig 2 is cam pulse x1 sorry im sure this gets asked all the time cheers

ahh that would be my problem, apologies i don't know much about ECUs. ill re wire and try again. Thanks for the quick response

Nearly ready for the first start, running yarris cop via dizzy cam sensor for now. I have the cam sensors and spark but when I test the injectors i get nothing. They are raceworks 1000cc injectors high impedance dead times in the photo. The neutral for the injectors are grounded on the back of the head. Could this be causing them to not trigger? Thanks in advance Andrew soarer base.pclx