Jump to content

Gtech performance

Members
  • Posts

    19
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Gtech performance's Achievements

  1. Hi guys thanks heaps for your input. I can just use a normal solenoid and the client can maybe sell the one he has. Thanks again for your help
  2. Hey guys Is it possible to use a fueltech dual solenoid boost control with a g4+ extreme? Do those ECU's have two outputs for boost control or can I use one solenoid on the boost controller?
  3. Oh that's good news yeah definitely a g4+ thanks heaps
  4. Cool thanks. I forgot to mention that the unit is really old I'd say 7 years over. It's the red aluminium housing. Still good or no?
  5. Hi Adam thanks for that. Is it just a matter of connecting can wires or is there some settings that need to be set eg like setting the connection for an aims dash?
  6. Hi guys will the g4x can lamda work with an older version g4+ Xtreme?
  7. Hi guys I'm using motec hall effect sensors on a thunder ecu. On the data sheet it dies state that these sensors are 5 to 30 volt sensors. Can I use a 12 volts supply which I already have there? Or do I need to use a 5 or 8 volt output? Thanks
  8. ah huh got it thanks heaps for your help guys il try it and let you know Thanks again
  9. Ok cool so if I'm understanding correctly, my offset at the moment is 276 so do i change it to 636?
  10. Sorry quick question, did you mean 180 or 360?
  11. hi dx4picco yeah the trigger system is still the standard rb crank angel sensor. thanks heaps for that. il give it a go in the next few days and let you know
  12. Hey guys how are you? IV got a thunder in a vl with an rb30. It was running wasted spark with an el cool pack and I have just wired up 6 r35 coils using 6 ignition out puts. I have change the ignition mode to direct spark. The car doesn't start. And looks like the timing out. Should the car start? Or is this normal and Im not doing something to get it going?
  13. Hi Guys Im about to wire up an aims strada dash and don't know which wires to use for the indicator, low beam and high beam warning lights. Can anyone tell which wires or pins to use?
  14. Hi Adam thanks again mate your a champ Il let you know how I go Cheers
×
×
  • Create New...