Ninetails

Apologizes though, I know it was vast. I have joined hpacademy and will try and educate myself a bit more before I continue. Cheers Kris. Thanks again for all your time.

Cheers I will have a look. Im sorry I was a bit vague in my opening, because I know its a tall ask - but after my car has stalled on me so many times I have gotten a bit "scared" to drive it. And also very uncertain if I have done something wrong etc. I was hoping someone could do sort of a skim through to see if there is something bonkers or red flags. Things that maybe should be turned off\on. Hoping to get control of the knock setup as soon as possible for example. Again thank you so much for your time.

Hi Link community! I have been searching and reading on these forums some time and I am impressed with the help provided. Briefly I would like to be open about my knowledge in this area(tuning) to be very newbie-ish. I usually take my time to read up on subjects or things I dont understand, but there will be alot of new things for me here. Hopefully I wont be to annoying. Car: Toyota Celica ST185 Carlos Sainz, 2gen 3SGTE. Its my first time setting up a Link g4+ pnp, or any aftermarket ecu for that matter. I ordered it very early on before I intended to use it. Unluckily for me I got the wrong unit. The seller sold me the mr2rev1, and I learned after I shouldve gotten the st205 version for the CS. Problem because it was so long after I had bought it, so I got creative and got the schematics for both and I have replugged\wired everything to work with the unit I got. Its running, tuned a little only on road, but it has died/stalled on me a couple of times which im still not 100% why. My fuel relay was getting very very hot, and I have rewired the whole system so it goes on its own relay now with power directly from the battery, im hoping that was the problem. I was hoping someone could take a look on "todays" situation and perhaps guide me somewhat on things that might look off or weird. Any help is much appreciated. More about the car: 2Gen 3SGTE Engine, CP Pistons 86.5, Manley rods, Acl bearings, ARP bolts, TVIS delete plate, EGR removed, hks super sqv iv, 9 hole manifold, mishimoto catch can, mishimoto radiator, turbotechnics S148 hybrid turbo, apexi straight power intake (afm removed), hks metal head gasket, 3" downpipe, hks silent exhaust, link 3bar map sensor, link can lambda, racerx fuel line, walbro 450fuel pump, mac 3 port solenoid, long iat sensor in intake (coldstartinjectorposition), deatschwerks dwr1000 fpr 4bar pressure (4bar was more stable then 3bar), bosch ev14 1100cc injectors and probably more i cant remember right away. After the car is a little more stable I will get it on a dyno, I just dont have the money to do it right away. Each hour costs quite a bit. Plus I really like to learn as much as I can. I have done everything on this car myself. I have attached the latest ecu file and logg. And again thank you so much for your time even reading this. Cheers. CarlosSainz v15.pclr logg 04.06.22.llg