Alexduong88

04 sti log.pclx PC Datalog - 2022-05-3 4;01;23 pm.llgx adamw i attached the tune and short log

Adamw do you have a email I could send this log and tune to?

Can you sell me how to do that and I can get you a log I got the car home now. But don’t know how to get you a copy of the tune and log

Adamw any tips on how to check if it’s been calibrated correctly or how to check the error values are set correctly? Brought the car home from the dyno. The tunner had no idea what was happing with these codes throwing

These are those codes I’m currently getting

I don’t have access to the tune as the car at the shop trying to get a tune. The tunner told me that was the code and he tried to Erase the code and keeps coming back right away

Needing help have a link g4x for a 2004 Subaru sti and getting a analog error 3 has anyone ever had this issue that could help?

we are using version 6.22.25 I’ll have to get with my tunner today and get some pre and post pictures of the power cycle. is the a certain way to store the file and we are doing it incorrect?

Yes storing the setting before shutting off but same thing happens over and very again and can’t figure out why it won’t store

It won’t save any setting we put in. We have it all set up do a few pulls on the dyno shut the car off to cool and when we turn it back on none of the Parameters are saved.

Need help on WRX104X. I have the sequential gear cut wired up to the loom on an 11 and we set the parameters on it and works perfect but once we shut the car off and turn it back on it will not save. Anyone have any idea or have had this issue before on why won’t save the parameters on the ecu after restart?

Adamw do you know what color wires are for input like a diagram?

Is this the expansion loom you would need to get the AN input?

! so with the strain gauge with a amplifier that outputs 0-5V could you use the AN Volt 11 or AN Volt 12 on the expansion port? Or would I have to find a AN with a 5v? Thank for the help

Sorry New to the link ecu …..how does the analog output work is it a extra harness you need to buy to plug in?