Jump to content

Brian Huebner

Members
  • Posts

    1
  • Joined

  • Last visited

Brian Huebner's Achievements

  1. I own a 91' Toyota 4×4 pickup that came with a 22-RE. At 320,000 miles and 31 years of ownership, I thought it was time to upgrade, and purchased a 3UZ-FE (2005 Soarer) and installed it using a bell housing/clutch kit to retain my five speed and transfer case. Cartunes in Australia suggested I purchase a Link Extreme ECU, which I did. The 3UZ is complete with the stock ECU still attached. I need a pinout for the Link ECU telling me where each wire goes on the engine and chassis. I plan on running throttle by wire and cruise control, all four 02 sensors, VVTi, A/C and colling fans. Seems that for $1,500 the ECU instructions would contain the pinout. Just need to know where every wire goes. (02, temp, knock, VVTi, oil, gas pedal etc.) Thanks in advance for any help.
×
×
  • Create New...