Jump to content

Biased Opinion

Members
  • Posts

    7
  • Joined

  • Last visited

Everything posted by Biased Opinion

  1. Just a quick look at various electric power steering solutions would suggest that the amperage required is far above what any single output on the razor PDM could supply. Maybe an ECU controlled solid state relay might be a better solution. Would certainly be alot cheaper than the razor
  2. What is the header on the daughterboard for the 2 canbus ports, i know its a JST 5 pin something but not sure exactly which one.
  3. Is it possible to access these outputs via the same method as Aux 9 and Aux 10
  4. I have just been mapping out the changes i need to make to my harness and where I intend to add to the expansion loom and it seems that Ign 8 and An Voltage 7 have no pinouts on the S15 Plugin G4X. I Know that Aux 9 and Aux 10 for DBW are not exposed by default on this ECU, is this just another case of no pins left so there is no output for it S15 Wiring.xlsx
  5. Yeah, im fine with modifying it myself as i have plenty of PCB soldering experience.
  6. Thats fine, are there any other outputs that are not exposed via the headers on the bottom board?
  7. After looking at the manual its clear that the DBW outputs Aux 9 and Aux 10 are not exposed on this ECU by default and the standard solution seems to be to either buy the DBW module or send the ECU back to link for them to add flying leads to add those outputs. Is it possible for me to just solder on flying leads to those pins. I assume the red daughterboard in the ECU is some standard part across all G4X plugs and that sits on the s15 specific board but has not had all possible outputs of a G4X exposed.
×
×
  • Create New...