jvincent4103

The CAP appears to have fixed the issue... Thanks for the help

Ive had no issues with the Lamda working until the last few runs A couple runs ago the sensor cycled through error codes 33&34&16 several times prior to actually getting up to temp and functional as normal. Now all i see is disabled and the sensor temp is frozen at 32F. Even if i select yes to run when stalled I can't get the sensor heat. I've replaced the sensor now and see no change. Any thoughts? I've considered adding the CAP but I'm not sure that's the issue I'm having. Attached is the screen shot of the last time it started working about half way through the run. EDIT, I am running the CAN LAMBDA module.

Thanks Adam, Yes I can hardwire duplicate sensors for all the things I want to monitor but since I have all the data in the ECU already from its sensors I just thought i would be better off using can bus. I’m not in a hurry and would love to work on a solution if you think it’s possible. It seems like such a waste of capability not to pursue it.

It seems output format option are limited to standard and extended. Is it possible to output in a 32 Bit Float? Ive read mention of CRC32 being an option in the past.