CUCHI Motorsports

Can I hook up a LinkECU to: - Closed loop sequential turbo boost control - Methanol injection - Nitrous injection - Accessory control - Engine protection - Datalogging of a diesel engine, as a piggyback? The stock ECU is still in control of the fueling.

Fixed it! I feel dump.

The car is at the fabricator getting its rollcage done. I can’t start the car to get a log as of now because the engine was removed. I did have a screen shot of the trigger scope (cranking) and the trigger error. It has been like this since the beginning. Maybe this is the culprit.

Hi there, I have a EJ20 turbo engine controlled by a Fury G4X. Everything runs perfect, very smooth and makes good power. It idles perfectly no problem. however, I am having a hard start problem. Sometimes, it will start right up after 1-1.5 seconds of cranking. But most of the times, it does not want to start. I have cycle power a few times then it would start right up after 1-1.5s of cranking. This engine is the EJ20X (JDM Forester I think). It has 4 VVT but I only run 2 intake VVTs. FINAL.pclx