Jeram

Thanks Adam. That's really helpful. I learnt something new today.

Thanks Adam. A simple adjustable timer delay at a single constant RPM is all I need. So it sounds like 3D launch mode is what I need? So when the clutch lever is pulled, in it activates the 8800 rpm launch rev limiter and it stays on until 0.3 secs after th clutch lever switch is released. I had a look in the 3D launch mode but wasnt sure how to configure the table to my needs. I attached the tune file to my first post.

I'm new on this forum. We've got a G4+ Fury on a dragbike. I'm needing to set up a delay timer for a digital input. DI - 3 Clutch Switch is used to trigger the Launch Control (single launch rpm limiter) The physical clutch switch (non adjustable) is disengaging too early in the levers travel, before the clutch has engaged. Its causing the RPM to spike from 8500rpm (launch control) to 11500rpm. The rpm spike is frying clutches. I need to set up a timer delay, so that the launch control rpm stays on a couple of tenths of a second after the clutch switch is released. I'm not sure how to set this up. Any help appreciated.