Hey, I'm fairly new to wiring and only doing it because no one in my area wants to go anywhere near it. I'm trying to wire in a Taarks GTI-r Hall sensor into a G4+Fury. Want to double check I'm wiring the following correctly
Pin 1 (12v+Filtered) to Pin 5 B Loom (14V Aux)
Pin 2 (GND ECU) to Pin 34 B Loom (Ground)
Pin 3 (Home/Sync) to Pin 9 A Loom (Trigger 2)
Pin 4 (Trigger) to Pin 8 A Loom (Trigger 1)
With the Shield wire do I run a wire to Pin 7 A Loom (Shield/Ground) or is it just a wire ran along side/over the top of one of the sensor wires?
Thanks