shinty

Hello Adam Thank you for your kindness. If you have any questions, I would be grateful if you could help me.

Adam I'm sorry I didn't understand the meaning. DI6 cannot be turned on / off with the AC switch ...

Even if you don't press the AC switch, if you set the drive type to low or high, it will become active ... Once you set the clutch to be engaged, you will not be able to disconnect the AC clutch unless you connect it to the PC link.

I tried various methods on the AC clutch control screen. I tried turning the pull-up on, setting the operating state to low or high, and setting the ON level to low or high, but under no circumstances I could not turn it on or off with the AC switch on the air conditioner panel.

Hello Adam In the test of the AC clutch sent by the screenshot, AC is turned on and cold air comes out properly. However, even if the request and the AC clutch are active, the air conditioner will work regardless of whether the AC switch on the air conditioner panel is pressed or not. To put it simply, AC works with a PC link, but the AC switch on the air conditioner panel does not work at all. The AC switch is energized and the lamp is lit properly.

Thank you very much! I looked at the status, but it was all 0 ... The wiring is definitely connected, but ...

I understand the coil on plug! With independent ignition, the octopus is moving without problems.

Thank you for your reply. I have set the input of the request to DI, but I do not know how to see if the signal is coming. Which option do you choose to set the pull-up resistor? thank you I confirmed that all the wiring of the connector was correct. The ac request is in DI6.

Thank you for your reply. I'm sorry I don't know what the coil-on plug shows. The octopus is working fine.

hello everyone！　I bought a plug-in this time and set it up, but the air conditioner alone doesn't work. With the AC clutch setting, the clutch operates with PC LINK, but ON / OFF with the AC button on the air conditioner panel does not work at all. Electricity is coming to the AC button, and the wiring is also connected. Are there any other settings? I have been suffering from this problem for a few days. please help me. please

I am also suffering from this problem. ACMG works fine, but I can't press the AC switch to turn it on or off. Did you find out anything? I'm using a plugin.