Gerhard
Members-
Posts
12 -
Joined
-
Last visited
Profile Information
-
Location
Sweden
Gerhard's Achievements
Newbie (1/14)
0
Reputation
-
Gerhard joined the community
-
Hi I have a homebuild Super 7 whit a Hayabusa Turbo engine. http://www.maxxtuning.se/kundbilar/mapp ... --gerhard/ Problem is the big bang when i use the gear cut, and we talking BIG BANG those who hear it think someone hunt elk I use a Strain Gauge / Load cell from Cordona, gear 1-3 I have 0,08 sek and 4-6 I have 0,06 sek cut period. Is it possible to reduce the bangs ? As it works now, I can not use it on track days because of rules on noise is max 95dB. Regards Gerhard
-
Hi Dave Thanks for the inputs. It would have been nice to use tabels, especially for oil pressure as the hayabusan has a very low pressure at low rpm. But as you say I got to have the table for boost. So I have use the virutal Aux and have now the warning for oilpressure < 4000 rpm, oilpressure > 4000 rpm, ECT, Oiltemp, and coolant level. And I have two not used left in Virutal Aux 3 I see one Diff. Fuel Pressure > and Diff. Fuel Pressure < but I can't find out how it works and can't find any thing in the help file about it. Is it somt thing I can use for check fuel pressure on boost ? Regards Gerhard
-
Thanks for the reply Dave I had not thinking about using a pwm output :oops: I have already used all my AUX O/P so i have to change one to a Ignition O/P. I'm try to make it work myself, otherwise hear from me again :mrgreen: Regards Gerhard
-
Hi I have a contol lamp on a output for several functions, oil pressure, water temp, etc. Is there any way to get the control lamp to flash by using timers ?
-
Hi late response but I have a Super 7 with Hayabusa engine and Vi-PEC V88. I use tandard triggers and use E85 fuel I has just started it up after I installed the turbo.
-
viewtopic.php?f=3&t=873
-
Thanks guys Works perfect when i connect to the ECU. Augusto your english is probably much better than mine Gerhard// Sweden
-
Hi I try to make a map using "V88 Base Map .PCL" to a 4 cyl . But I can't find out how to switch off injector drive 5-8, or use it like a output. They are greyed and locked like the Ingnition Drive 1-4 (and Injector Drive 1-4). Gerhard
-
I got whit a V88. I'm about to install it. The car is a Super Seven type with a -06 Suzuki Hayabusa 1300cc engine. Engine setup. Mitsubishi 19T turbo. AEM CDI ignition Hayabusa cops. Injector Dynamics ID725 injectors. Innovate MTX-l wideband. Link 2.5 mapsensor. The original triggers and TPS. Vipec ECT and ATS sensors. Can you help me with a base map? Regards Gerhard
-
Denmark is my guess. Gerhard/Sweden
-
Thanks :!:
-
Can I use the original triggers and sensors on a Suzuki Hayabusa to a V88?