Evo94g63

Hey link friends I need help my evo9 was parked i went to start it and it cranks but wouldn't turn on the car was running perfect and now nothing. It's getting fuel but no spark I put the meter on the harness to the coils while cranking and I have 12v going to the harness so i know i didnt pop the ignition fuse . A buddy told me to do the ignition test for spark and i did and i get nothing. Im so lost and don't know where to check next any ideals guys.

I honestly don't even know how to do that I had someone tuned the car. It runs and drives everything works I just wanted the tach to do the full sweep when u turn the key to the on position

The tach is working normal like it should Oh and I forgot I'm running the kiggly 12 tooth trigger setup now

Ok I understand what ur saying ty I thought there was a setting in the ecu that let's u do the full sweep when u turn the ignition to on position

Adamw The tachometer is working it was just the wire was in the wrong input. But was wondering could u tell me how to set the the tach to do the full sweap when u turn the key to on position.

Hello guys I need help I had my tuner put a g4 link ecu into my evo9 and he got the car running but the issue is the tach does not work. When he 1st got the car running at idle the tach was bouncing around 8-9k and I pick up the car last night and the tach does not work. He was also clueless as he told me to try and different cluster so I did that and the tach still does not work so I'm asking fellow link ecu members does the tach need to be calibrated to the ecu cause now I don't know where to go from here.