Jump to content

pikonshin

Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by pikonshin

  1. @The TIG sorry for the long answer. No. I use Toyota factory injectors. how are you doing with your project now? @Adamw I managed to cope with the problem of working only half of the engine. but due to the small difference in vacuum between the right and left cylinder heads, the AFR difference is a couple of units. is it possible for each cylinder head to be guided by the readings of only its own lambda?
  2. @Brad Burnett yes, ITBs from suzuki hayabusa. two pieces) @Adamw yes. I think right, because the right and left cylinder heads showed the same when I used the pressure gauge. but I will check again. I also noticed that there were wet spark plugs in the left head. I changed them. did a start and unscrewed a new spark. she was wet again.
  3. When I saw this message, the ecu did not show engine speed. now the ecu is activated I figured out why the engine wouldn't start. The signal and ground wires on the crankshaft position sensor were mixed up. changed the wires and the engine fire up. I also changed the map to download via tps But I have new problem only the right side of the engine works (2,4,6,8 cylinders) the left side (1,3,5,7 cylinders) do not work. I've checked everything I can, but I don't understand what's going on. there is a spark. I checked the basic ignition timing using a strobe light. everything works correctly. I tried turning off the phase sensor. I tried swapping the wires on the phase sensor. the signal goes to the injectors. there is fuel in the rail. below you can see the logs and scope trigger. Аny help would be helpful. Thanks! 1uzvvti_e30 tps load.pclx PC Datalog - 2022-12-11 9;52;09 pm.llgx TriggerScopeLog11.llgx
  4. Thanks a lot! But my engine won't fire up. Look, please my logfile and map file. (clarification, I do not use the map sensor and E-throttle because I have a multi-throttle intake) tests of injectors and coils passed successfully. fuel pressure 4 atm. PC Datalog - 2022-12-5 9;53;55 pm.llgx 1uzvvti_e30.pclx
  5. Thanks a lot! Please tell me something else: Is this Dwell map suitable for use with audi r8 coils? Ignition Dwell Control (ms).lte
  6. Hey Link, I have 1UZ VVTI and Link G4X XtremeX. There are several problems. How to connect the VVTI solenoid correctly? Where to connect phase control sensors? I did not find a sample map for 1uz vvti. If anyone has it I would be happy if you can share it. Thank you.
×
×
  • Create New...