I have a Thunder ECU connected up to a GM TB as follows
AVI 5 TPS Main
AVI 6 - TPS Sub
AUX Out 9 - Ethrottle +
AUX Out 10 - Ethrottle -
The Calibration works for this and it seems happy but I cannot get my pedal setup at all. Its a Penny and Giles sensor supplied with Tilton pedals (https://www.competitionsupplies.com/penny-and-giles-fly-by-wire-throttle-sensor-to-suit-72-792-and-72-794-mounts) and is wired as follows:
5v in - Red
Sensor GND - Black
OP1 - AVI 8 (Set as APS Main)
OP2 - AVI 9 (Set as APS Sub)
When I calibrate the pedal, I get nothing back at all and subsequent movement of the pot shows no change in voltage from the sensor inputs at all. Am I doing something wrong?
Any help would be much appreciated as this is driving me mad.
