TotalShopPrestige
Members-
Posts
5 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
TotalShopPrestige's Achievements
-
I removed the OEM Igniter and swapped to Audi R8 coils and the issue has been resolved.
-
I could see that but I also had the issue on the OEM CAS as well.
-
I’ll give another look at the spark plugs. I just updated the firmware hoping for a simple fix with no luck. The new cam sensor runs via the original CAS wiring. The harness is a wiring specialties harness.
-
TotalShopPrestige reacted to a post in a topic: SR20DET Trigger Errors
-
This car is equipped with the OEM sr20det CoilPacks, I typically run most SR20s on NGK BKR7E Plugs so they are resistor type plugs. The maincode firmware version is 6.20.17
-
TotalShopPrestige started following SR20DET Trigger Errors
-
SR20DET G4X Plug n Play Issue: Losing Trigger 1 sync randomly. So I have a car in my possession and I’ve been having issues with Trigger 1 sync. I’ve tried multiple known working OEM Cam Angle Sensors with each one showing little to no improvement. Most recently I’ve converted the car to a Taarks Hall Sensor Trigger Kit. The trigger issues are still present. Errors were every few seconds at idle. I added an additional chassis ground and this improved but it is still present. The air gap for the sensor is currently set to .6 mm. I have also attached trigger scope logs and photos of trigger settings. I’ve interpreted the scope to the best of my abilities. Looking for assistance as I’m running out of ideas. Thank you in advance. PossibleErrorCapture.llgx 1.llgx 2.llgx 3.llgx 4.llgx 5.llgx 6.llgx