Jump to content

emwerx

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by emwerx

  1. Thank you for the quick reply, I will be using C29. Thanks again for the assistance.
  2. Hello all, I'm installing an e85 sensor into an 2003 s2000. Tuner instructed the sensor be wired as follows: 12v - B1 or B9, Signal DI1/c29 or DI2/c10, and ground to c7 or c18. Problem is all these pins are used. So sensor 12v is simple enough, I can either find a switched source or tap into ecu 12v pre connector, however we prefer not to modify the stock harness. For sensor ground c7 is used for map ground and c18 is used for sensor ground no more than 1v. I could tap into c18 but again don't want to modify the harness. For signal in c29 is used for tdc (I'm assuming cam sensor) so that's a no go, and c10 is the vtec pressure signal, so again that's a no go. Can someone please provide proper pin locations for an e85 sensor. Thanks in advance.
×
×
  • Create New...