Jump to content

90awdtsi

Members
  • Posts

    12
  • Joined

  • Last visited

Everything posted by 90awdtsi

  1. ok got it, i have attached my file. hopefully that should be squared away. TriggerScopeLog6.llgx
  2. Hey Adam, I just attached a log. please verify they i am now getting both trigger signals. TriggerScopeLog5.llgx I now have the black top cas with the plug on top. this was not my issue though... i do have the low impedance injectors with the resistor box. i havent check my power at the injectors while cranking. that will be my next step..
  3. Really, i just attached a picture of what I'm seeing on my laptop.. based on the attached picture, the lines in trigger scope 1 are not signal lines?
  4. Ok thanks for the explanation Adam. so i added two more logs after freshened up the wiring on the CAS and i now have a CAM signal. but i still dont have spark or Injector pulse.. can you please review my logs and see if you see any inconsistencies. Im probably going to change out the CAS if its still giving me an issue. Thanks for the help. TriggerScopeLog 2.llgx TriggerScopeLog3.llgx
  5. I'm still not getting rpm when cranking and coils and injectors are not firing. Based on the log are there other settings I need to change? Maybe is it suppose to be rising or falling?
  6. TriggerScopeLog.llgxthis the the capture log i got from cranking it with evo1-6 default settings.
  7. Thank you I will try this tomorrow and post back
  8. Ok so no matter the trigger settings in the link, I should still have trigger signal in the scope correct?
  9. I have a coil on plug setup on my 90 4g63t wired for wasted spark. I use the stock cas which has the cam and tdc signal. I can manually turn on the coils and injectors which leads me to believe wiring is correct. However When i try to start the i get no rpm on link g4x vr4 and no spark or injector pulse. This leads me to believe it has to do with trigger setup. What would the correct trigger settings be for my setup?
  10. Ok however we have a power transistor also inline to fire the stock coils would there have to be separate fuse box in place or relay of some sort?
  11. I was looking to put r35 coils on my DSM 4g63t to eliminate the power transistor. I was wondering what pins to use for wiring on the ECU to make it work?
×
×
  • Create New...