Jump to content

trd87t

Members
  • Posts

    14
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

trd87t's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Following this... was interested when @lekonna started this project as I had already bought all the stuff. So interested to see the finished projects on here.
  2. trd87t

    2jzgte vvti help

    That's probably it. I was thinking that it was going by another name. Have you tried to toggle between Low and High?
  3. trd87t

    2jzgte vvti help

    Go to the fuel pump output pin setup and turn the pullup resister opposite to what you have it now. This happened to me on as well on my first hookup.
  4. I would be interested in your maps, can you post or you can email it if you wish
  5. Anyone have a base map for a 2J (non-vvti) w/ a PTE 6765 or 6766?
  6. dang it, you beat me to it I wanted to do the exact same thing... I bought an Arduino Uno and an LCD and it is sitting on my work table. Would you be willing to share code?
  7. I'll check my part number tonight and see. I doubt it's the same one as mine is from a 2JZ-TT. If it's the same, i'll post up my CAL Table tonight for you.
  8. you mind sharing your tune with me? I have a 2j and have terrible cold starts. however it does not get that cold here and when it does I'm usually at work and can't mess with it let me know and I can pm my email thanks!
  9. not to bring this thread off topic but are you using a windows skin to make it look like an Apple interface or you genually using a Mac?
  10. Ah cools! Thanks Jason
  11. I saw in the technical documentation on a Dash Display unit? Is it for sale yet? Otherwise, I was looking for a document that Ray had posted a while back that showed the Serial Data output. I am looking to making a custom 20x2 (or 16x2) digital display to output a couple critical parameters. I don't want additional gauges all over the place cluttering my interior. I'm basically looking at the Arduino project to implement what i'm thinking. Shouldn't be hard to do, just would take some time. Any information would be helpful. Thanks!
  12. I have a stock 2j-gte (non-vvti) and was previously using the stock MAP sensor. I have been trying to install an AEM 3.5 Bar sensor and get this error when I try to calibrate after changing my table: "Map sensor calibration command failed: current MAP <5kPa or > 5kPa of baro reading" I looked at the Real-Time values and my MGP is reading -9? I've searched and read only one person having the issue and it was due to a bad MAP sensor? I will be checking the Error values and make sure that the MAP is at 0V Low and 5V High. Is there any other checks I can do? Sensor Stats (CAL4 is setup for the Liner table): MinV = 0.5V MinKPa = 0kPa MaxV = 4.5V MaxKPa = 343.385kPa
  13. Glad to be back! Thanks to all involved in getting this forum back up and running!
×
×
  • Create New...