Jump to content

bcl

Members
  • Posts

    2
  • Joined

  • Last visited

bcl's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. I am looking at getting the AIM dash. My car is an older STi (MY00), so without ODBD input. I have done some research and have a specific Vi-PEC question and want to know if they know if the Vi-PEC "Vii-PEC to Aim Dash" adaptor cable is still required for the latest Aim Dash software. The ViPec site lists the part, without any reference to the version of Aim software that it connects to. ref http://www.vi-pec.com/original-pages-no ... shadaptors However the Aim Dash site documentation states that "users just need to install harness between the logger and the ECU", and "IMPORTANT: using the latest "VIPEC Manager" software NO ADAPTER IS NEEDED to connect Vi-PEX V88 to an AIM logger". ref https://docs.google.com/viewer?url=http ... 00_eng.pdf The above information appears contradictory, and my reading is that that is a near plug'n'play using the Aim cables is all that is required, and that the Vi-PEC adaptor is now redundant. Help appreciated. Brian
  2. Hi, I am new to Vi-PEC, I have a V88 on my 2.5L Subaru engine. Over the past 12 years with this car I've had the stock ecu, Unichip, PowerFC and Autronic SM4, and am now very happy with the V88. I have a couple of very basic questions, after I bought a cable to connect to my PC to get some logging data. I'm also looking at getting an Aim Dash for display/log functions. 1. Is it possible to permanently write(store) to the ecu any changes without performing a "Store to ECU (CTRL+S)" The V88 documentation says: "When making tuning adjustments, changes are made in real time. These changes revert back to there previous setting unless a Store has been completed." My tuner told me I could permanently update the ecu without doing the store, so I'm a bit confused about this. 2. I saved my tune to PCL file. I note that the ECU logging is set to OFF. I it had been set to ON, would the ECU logging data have been saved to the PCL file, so that I could see any log files through the Log File Manager, or do the ECU log files have to be explicitly downloaded. Currently no log files are showing, so I’d assume either no previous logging has been done, or they have been cleared. Thanks, Brian
×
×
  • Create New...