muzzytt

I'm interested in this dash is it all ok now any issues since ? Cheers

I had a similar issue with my fury when I logged and downloaded nothing would show of value. After traction control not working I just took it that logging didn't have enough capacity to properly do so....

Thanks for that Adam . I will be running high impediance Bosch 2200 injectors. Cheers

I just upgraded to a thunder for my new race car. It came with a 5 meter loom. Just want to know if any issues running long looms compared to shorter. Cheers Muz

I tried using that vems on my fury and didn't work very well at all. Got erratic readings from them

I thought i would update this thread. I ended up buying 4 frequency dividers. For reasons unknown they didnt work. Sometimes worked sometimes not . I tried everything new wires triple checked but just couldn't get reliable signals into the ecu. So i have given up tc is not going ti work on the fury if you have more than 12 teeth on your abs rings as simple as that just a headache trying to band aid a solution to this. Best option is to sell The fury and buy the thunder

Yeah was weird as car was running fine until it hit boost 4500rpm then sounded like a mad misfire.. To think these settings caused that would have been hard to detect because of it feeling like a mis fire.

So if the tuner misses this setting is it a fault on their behalf?

https://ibb.co/kbHNuk

http://i267.photobucket.com/albums/ii314/Muzzytt/20170724_094404_zpsfjc1pjbc.jpg

I don't know if this is a glitch in the base map but when you load this map into the fury or thunder the injector settings come up as in the picture. This has been identified as Danny's problem. Should a link dekar not know about this? Does a tuner not go through these settings? I also not this base map says plug in.. Is there supposed to be another base map for wire in ecu?

Mine is at 8ms too dunno why yours was at 12?

cheers mate

Jo just to share my experience My values are similar to what you call bad. my offset is 173 my vvt cam solenoid is set to 175hz in the aux output

the analogue volt channel in the drop down menu what do i select . thx