Jump to content

Top Tune NZ

Dealer
  • Posts

    138
  • Joined

  • Last visited

Posts posted by Top Tune NZ

  1. Hi simon  you got a good one there

    the g3 wiring comes with two shielded wires a grey and black inside these are two wires these are trig one and two as the manual or help file will show and use the trigger wiring earths not a block earth . im fairly sure the magna is opto/hall  and you will need to scope the triggers to get correct set up  ie rising edge.  email me if you still have issues

    [email protected]

    cheers ross

  2. Previously Josh L wrote:

    Hi there, I have a non-vvt 1uzfe that I have wired up using multi-point group injection. I've noticed there's a 1uzfe vvt basemap for the G4 Xtreme provided with PC Link 4.6.9.738 but I wasn't sure if this would work even after adjusting for group vs sequential injection etc etc due to the likely timing differences etc... Does anyone have a basemap for the non-vvt 1uzfe? Cheers, Josh.

    hi josh i have a a few good maps for these give me a email on [email protected]  so i can email one to you. you will have to reconfig the aux etc but it is a good base tune  

  3. hi anthony great to here you have fited a link ecu, just a small bit of advise and i dont mean to be rude but you should really take your car to a link tuner to tune once you have it tuned then study it and imrove if you can there tune as it is very expensive when or if you make a mistake. which as you know will set back the pleasure of enjoying you ride. the base map allows you to start your engine only and five hundred hp is very high hp i build and tune rb engines as my main type of engine  and can advise you on what you would need to fit in order to acheive this but you need to  do internal things to make it last

    cheers Ross

     

        

  4. have you tryed it in another an volt try one or two and see if it still has a problem

    i have had a couple of issues like this but it was with an volt 2 where it shared with a di4 and there was a pull up on under the di side. you can email a log of it to me if you like and i may be able to see whats going on  

  5. i would like to see plug and play ecus to pick up the main cars on the road in nz and austrailia

    late model holdens and fords would be a good start there is nothing on the market for ba and bf falcons and we all know that this cars drink the fuel and i need to save money on fuel asap so simon i will slip you a box of cody if you can whip me up one before the weekend cheers ross

     

  6. my advise buy a new g3 wrx link  and save your self a lot of head aches. by taking your car to one of the dealers listed on this web site buy the ecu from him and let him/her tune it trust me i tune these things every day of the week .I eat sleep and shit these ecus and i love them because ive neen trained to tune them, like all of us dealers we make it look easy but trust me weve all had our sleepless nites learning lol. oooopppsss its late again better get back on the dyno.

    cheers ross 

    067548336

  7. please put better plugs on map sensors. supply better looking and easier to mount boost control solinoids. drill the vacuum hole a mm bigger on lem ecu's make ecu boxs more water proof or being out a special marine ecu. peak and hold ability. smaller ecu boxes and or smaller adator link boxes. closed loop tuning knock control. a magic fairy to install and iron out all problems over nite so i dont have to the next day. greater margins. a money making output would be nice to. and a ddt logo in the display link the ability to have the display link and pc pluged in at the same time . a fused relay supplied with the ecu. a way of nowing < scope pattern > on pc link for checking trig one and trig 2 would be great just dreaming but food for thought love the product tho chur from the waitara boyz ross

  8. hi laurence, i take it you are trying to use your std ignitor if you want to do it the easy way buy a link ignitor trust me they are so easy to wire and you can see by looking at the flashing led lights if you have made a mistake, i have now installed well over a hundred link ecu's and dont even bother to waste my time wiring up to std ignitors and they havent got the same grunt that a link ignitor has. std ignitors always waste your time and money by wasting more time and money tyring to work them out lol... if you really want to get your std ignitor going i can get a diagram out for you cheers ross

  9. soundz like a wiring fault? do you have a hand controler that you can check engine temp also check the vacuum hose is connected correctly to the map sensor. if it was right for a few days it wont be a ecu fault it will be in the wiring or vacuum hose area.

×
×
  • Create New...