Jump to content

James Supra

Members
  • Posts

    2
  • Joined

  • Last visited

James Supra's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. I'm wanting to know if it is possible to use six channels for igniter, and have some coil on plug coils which are wired to ecu using ground power and triggering from each but still run in the wasted spark on a six clyinder. How could this be setup if its possible? Perhaps spilt the three output drives to pairs and have a channel for each igniter? Thanks
  2. Is there any kind of speed sensor that can be used with the g4 storm to make my digital dash work again? Maybe a hall effect type sensor? Since the computer install the digital dash has stopped reading speed and odometer. The original speed sensor on the back of the dash cluster worked with electronic pulses to convert the dash to read out digitally. This has three wires ground, power and trigger for pulse width which originally went back to my factory ecu but is now not doing anything. Although it is still cable driven from the gearbox it has this speed sensor as well for the digital dash setup. Maybe there is something that can replace this and read speed and odometer again from an imput on the link ecu. Any thoughts welcome
×
×
  • Create New...