Jump to content

Ken

Members
  • Posts

    2
  • Joined

  • Last visited

    Never

Everything posted by Ken

  1. OK. I know it was way back in July 2012 when you needed this but should anyone else need it here it is. The USB is digitally isolated with a ADuM1201ARZ But has a USB bridge CP2102 before entering this IC I could go one for hours but the design but if it's a pinout you want. For the PCB header:     Pin 1 USB GND    Pin 2 USB D-    Pin 3 USB D+    Pin 5 USB VCC (+5V power must be connected) It appears that Pin 4 doesn't doing anything (future options maybe) and as all the requirements for USB are found I care not look into it. So therefore on the LTW 6 pin Mini panel connector (Which appears to be LTWAU-06PMMS-LC7001) the pinouts are: Pin *1 USB VCC Pin *2 USB D- Pin *3 USB D+ Pin *4 Not Connected Pin *5 USB GND Pin *6 Pin 4 on header mystery pin *Pin assignments for the LTW connector I have have given as looking at the male pinned connector (on the panel) starting clockwise from the keyway is pins 1 to 5 and pin 6 being the middle. I could not find anything on LTW pin definitions for this connector without signing up on their site yet again. Tried and Tested!!! Enjoy!
  2. I too need this! 6 months and no reply? Worse case I can reverse engineer it.....
×
×
  • Create New...