Dan Rae

I currently have no spark. I have a 1uz with G1 V5 that I did have running at one point. The ingitors get hot after cranking the engine. I connected a test light from the battery to the negative terminal on the LH coil plug and it only comes on for a couple of seconds after the engine has stopped cranking. Shouldn't it pulse while cranking? Also occasionally the RH coil makes a buzzing sound after cranking. I'm well and truly baffled? Any ideas?

Scrub my last. I just re-read the installation manual, and I have earthed relay terminal 86 rather than put power to it.

Hi I'm trying to wire in a V5 to run a 1uz-fe. It was originally set up in a Soarer piggy backing the factory loom/ECU. As such the Link was not wired into the fuel pumps. I have now connected the pump to the Link but when I turn the ignition on the pumps won't run. When I bridge the 12v power supply and the pump out put on the connector the pumps will run. Both earths and 12 V are good. Does the Link need to be configured to run the pumps? Or is it something else? Cheers