Evan Stone

Hi There Is there a base map for a 1uz non vvti using a g4 xtreme? The motor is running coil on plug setup and sequential injection. I have tried to use the 1uz vvti base map, changed the triggers to 1uz no vvti, turned off the vvti stuff. Checked the timing and offset to correct it, all seems ok. Have tried to start it but it wont start and get back fires every so often. So would seem the timing is way out? think im missing something basic Any suggestions would be great. Have attached the base map file. Thanks heaps 1uzfe.pcl

Hi there Just a quick question, im wiring up a 1uzfe non vvti running a g4 extreme, motor is just standard at this stage. Is it worth while running oxygen sensors? just use the standard narrow band ones? both of them? Or would it be better to use two wide band one ones? Or is it not really worth using oxygen sensors at all? Just not sure on what to do. Thanks for your time

Hi Scott Thanks for the reply, i suspected that would be the case. A G4 Atom would be suitable? Thanks Evan

Hey there i have a v4 link running on a 1uzfe, standard 2x coil distributed ignition system. I want do do a coil on plug conversion with the coils from the 1uz vvti. Can i run a wasted spark setup with the two ignition drives, ie run 4x coils on each drive? Thanks for any help Evan