Errol Feistl
Members-
Posts
2 -
Joined
-
Last visited
Never
Errol Feistl's Achievements
Newbie (1/14)
0
Reputation
-
Errol Feistl joined the community
-
Hi Simon, Thanks for getting back to me. Unfortunately the G4 Xtreme just doesnt appear to have enough inputs/outputs for me... From what i can gather i need the following... 8 * Injectors 8 * Spark Plugs 1 * Engine Oil Pressure 1 * Engine Oil Temperature 1 * Coolant Tempeature 4 * TPS (Not sure why it needs 4, but thats what your diagram shows) 1 * MAP Sensor 1 * Idle Air Control 1 * Cam Position Sensor (Maybe more?) 1 * Crankshaft Sensor 2 * Knock Sensors 1 * Fuel Pump Output 2 * O2 Sensors 1 * AC Sensor Then i want to add 1 * Supercharger Coolant Temperature 1 * Gearbox Oil Temp 1 * Diff oil Temp 1 * Aux Coolant Temp 1 * Power Steering Temp 3 * Thermofan Outputs (As i need multiplte variables, the Virtual AUX can only do 3 combinations) 1 * Gearbox Pump Output 1 * Diff Pump Output 1 * Aux Pump Output Plus i wanted the ability to have some input/output switches for alarms etc and possible convert to electronic throttle (not sure how many inputs/outputs this requires). Plus i cant find any information on whether it can be linked with the standard cluster... Does anyone know of another product with more funtionality? Cheers
-
Hey guys, I'm looking at purchasing a G4 Xtreme but have a few technical questions im hoping someone can help answer. Firstly, the car its going into is a VX commodore (non-canbus). 1. Can/how do i configure one of the outputs to be switched on/off based on a temperature reading with a temperature hysteresis value (via the analog input). EG - When temp sensor 1 reaches say 70 degrees, switch output one to ground. When temp sensor 1 drops below 65 degrees, switch output one off (No ground). 2. If the above is possible, can you program one output to be driven my a number of variables. EG if temp sensor 1 reaches 70 degrees AND/OR temp sensor 2 reaches 70 degrees, switch output one to ground. 3. With the PC Link software, can i have the temperature reading from the above sensors displayed as a digital or analog number? Can i have the number change colour when it reaches a set temperature (Or have the background around the number invert colours)? Can i have a 'warning light' show up on the screen when an output relay is 'active'. EG, output one switches to ground and a box/light/item changes colour in the software 4. Can i have a 'shortcut' button placed somewhere on the screen which switches between configuration tabs? (The idea here is install a Car PC running the software and outputting to the touch screen headunit. I want to be able to touch the screen and change to the next set of values. 5. Is it possible to transmit the raw data to a remote install of the software? EG, I have a windows PC in the car that connects to the ECU, it receives the information then transmits it over a wireless signal to another PC which then displays the information. I know i could use a RDP type setup, however the bandwidth requriements would be much larger. 6. Can you store multiple tunes and switch between them easily enough? Again it would be great if i could do this via the touchscreen. 7. How easily does the G4 link with the standard BCM in the commodore? Will i still get readings on the dash/cluster of instant fuel usage etc. 8. Is it possible/how do i hook up sensors for things like steering input, brake pressure, throttle position, clutch position? 9. Is there a bigger version than the G4 planned with more inputs/outputs? (Or a plug in module to increase the capacity of the Xtreme)? If the G4 Xtreme isnt capable of the above list, any recommendations on what might be? Cheers,