Jump to content

Jesus M. C.

Members
 View Profile  See their activity

  • Posts

    7

  • Joined

  • Last visited

 Content Type 

Everything posted by Jesus M. C.

  1. Jesus M. C.
    Hello. I've a G3 ecu upgraded to the latest fimware v1.9.2. Can I use directly G4 software on it? or I must do some more things? Thank you.
  2. Jesus M. C.
    I have a lot of problems programming my G3. Can you tell me the correct injector deadtimes for 550cc denso 195500-1370 low impedance tan tops? And what will be the correct dwell times for a single ignition coil with distributor on 4 cylinders. Raising injector dead times help me to soften idle, but i have a missfire past 5000rpm and i have modified dwell times from 2,5 to 5ms with no results, and i don't know if i must go furher this values because of only one coil for the 4 cylinders. The car is a Mazda 323 GT-r BG8Z. Thank you.
  3. Jesus M. C.
    I'm sure about the gt-x and the gt-r doesn't have VICS system. Only non-turbo versions have the variable intake.
  4. Jesus M. C.
    Hello i am new i am an owner of a new lg3 plug and play mazda 323 GTR ecu.My question is since i have to illiminate the mass air flow meter where is the location on the ecu or adapterlink do i have to wire in the mapsensor.Can someone care to give me the instruction, Hello Elvis, i think you are wrong because the map is inside de ecu. I think you are talking about wiring the intake temp sensor. Then you must search the signal wire and the ground wire that goes to the maf sensor, because it's the nearest position for taking this signals. The color for the signal to the ecu are red with black strip. The color of the wire for the sensor ground is black with brown strip. I hope this helps you.
  5. Jesus M. C.
    It's an european 1994 BG8Z Mazda 323 Gt-r, what you call familia gt-r. The ecu i have is the g3 link with mazda adapter, updated with the latest firmware. Thank you for the fast reply.
  6. Jesus M. C.
    I have read about an autotune firmware. When did you release it? Thanks.
  7. Jesus M. C.
    Hello, i have a problem with my car. Idle is not stable. Seems like lambda correction, but i have tried to disable lambda, idle actuator and working only with ignition and fuel maps it continues failing. Any of you with base maps for this car to try? Thank you and excuse my poor english.
×
×
  • Create New...