Nick Stone

ok this is kinda link related. im using a lem v5 and want to run the standard dash cluster tacho using ig3 from my link, my question is does anyone know which pin on a standard gtapex trueno ae92 dash cluster is for the tacho? Nick

sorry should state im using a lem v5 on a redtop 16v 4age. looking for which tps plug wire colour as above should connect to the tps wire and 5v wire on link

http://www.canze.org.nz/forum/hosting/tps.jpg Yellow = Vcc Red = VTA Blue = IDL Brown = Earth (E2) according to the image and the pin out which wire is my tps and which is the 5v? cheers, Nick

will try to get a diagram up later. I am using a link lem v5 on a 4age with standard dizzy, coil and an sr20de ignitor. i think the pinouts for the ignitor are white = coil, black = ground, green ig 1. currently it will crank but no spark. placed led on injector and it flashed (before blowing, no resistor) also placed led over white (coil on ignitor) and 12v+ which flashed aswell (then also blew, no resistor) went and brought new coil today and it still wont turn over! what could be wrong? all help appreciated -Speed