Ivan Regester

I am trying to set up the Anti lag to run as Group N configuration with no switch input, but in the drop down menue there is only mode 1 (group A) not the mode 2 required for group N. Please help.

Ok I am going through the set up with the adaptor link instructions and it has the Aux 6 output as Intercooler pump. I was goig to use the V1-2 (as there is no Legacy) base map and in this it has Aux 6 as fuel pump. In all the drop down menues there is no allocation for I/C pump. Is there a simple answer that I am overlooking? Secondly the G3 I purchased has the 5 bar map sensor and the drop down menue choice gives either 2.5 or 7 bar, what would be the correct selection? Thanks Ivan

Another question is I currently have a Possumlink ecu fitted, am I able to retreive this file and use that in the G3 so that I have a base map which suits the current engine configuration? If so how can I switch files?

Thanks for your help. Also, are you able to run anti-lag 'always on' TPS switched and then have the choice of either speed or launch control via the digital input. As I am waiting for a link dash for these to display.

I am wanting to set up my G3 using an adaptor link onto Legacy rally car, is it possible to conbine: 1) Dash switched anti-lag 2) Speed input (can you use the std speed input from cluster to ecu) 3) Launch control and flat shifting Or is it a matter of selecting most wanted choice?