CHRIS WILKES

yeah i found the download for mu ecu and got all the info i needed excellent. i now have a problem and i discibe it as best as posible. i connected up the ecu hooked up power swiched, connected earth point seperatly, found my trigger from cam angle sensor (in dizzy type) connected green wire, 12v at tdc (not sure about the 12v i thought it should be 5.5 or 6.0v). connected up my injectors vr4 low imp, i also have the resistors fitted big gold type things, so i thought it would be ok. i then tested the trigger signal at the ecu plug withg out the ecu connected, 12v at connector ok, i then plug in the ecu and the voltage goes to 1 volt and there was also no power coming out the other side blue wire. and i also have 12v at orange injector wire and 12v on the othe injector wire also. as this ecu is used is it posible that i have purchased a lemon, so can i get it tested or can i get it repaired ect. cheers thanks for your help ,very pusseled.

yeah hi just got a ecu today was fitted to a mx5 1.8 bp with turbo conversion. i want to fit it to bf 323 1.6 turbo. not sure what ecu it is g2 g3 ect ect ,has some numbers inside mx36 tt2avo 131000. also were can i get a wiring diagram for this ecu, as i need to know which colour wires do what and were they go. also it looks like the power/ground and trigger are all picked up at the coil packs as i cant see any other main power wires ect. any help would be a great, cheers chris