Alex1436215396

Is there someway to make the CE light turn on when launch control is active? I've got launch control set to arm when the clutch has been pushed in for 3 seconds, and with out giving it a test rev I can't tell if it's armed properly or not. I was thinking of setting the CE light aux output as a GP output with an OR condition on either a virtual CE light being active or the launch control being active, but it's not possible to select Launch Control active state as an input. Any ideas how to do this?

Hi Jurgen, thanks for your reply. I've now altered the wiring so that trigger 1 is hooked up to the NE wire and trigger 2 is attached to the G2 wire, this is making the trig signals and rpm counter work, haven't tried setting to cam pulse 1x yet as having a few mechanical issues with the engine.

Hi, I've just finished wiring up my G4 and tried cranking over the engine, it looks like I'm getting no signal from the CAS (the distributor on this engine) as in the tuning section of PCLink Trig1 Signal, Trig2 Signal, Trig1 error counter and RPM all are saying No or 0. I've wired it up with trigger 1 going to G1 (or pin 2 / red wire), trigger 2 going to G2 (or pin 3 / green) and grounded to G- (or pin 4 / white) and the NE (pin1 / black) is not attached. I have configured PCLink as follows: Trigger 1: Type: Reluctor Filtering: Level 2 Multi-Tooth Posn: Cam Tooth Count 24 Trigger 2: Type: Reluctor Filtering: Level 2 Sync Mode: Cam Level Engine is a toyota 4age 20 valve blacktop. Can anyone give me some help with this wiring please?

I have a g4 knockblock and am wiring it to a knock sensor with only a single wire. The knock signal wire will go to this wire but what should I wire the ground wire to? The engine block, the shield wire or something else?

Hi, I'm looking for a coil pack with an integrated igniter to make wiring simpler and tidier. This is for a Toyota 4age (4 cylinder) and I was looking to set it up as wasted spark. Does anyone know of a coil pack that will work for this? Alternatively, if anyone knows any coil-on-plug type coil packs that have both the integrated igniter and physically fit into a 20valve 4age I'll be really interested to know about them.