Jump to content

BMWRallycross

Members
  • Posts

    13
  • Joined

  • Last visited

Everything posted by BMWRallycross

  1. Would it be possible to add a selectable option to save the last state of an CAN button so its the same after an power cycle?
  2. Ahh nice, that function is not available in my G4+
  3. Yes I know that but I dont have the uneven trigger pattern that is on the cams.
  4. Im looking into purchasing an G5 ecu. Currently I have an G4+ on an BMW S65 engine and when I was looking in Pclink the VVT mode for BMW S85 seems to be missing in the new version.
  5. Ok I have to go that way for the CAN. I thought it would be nice to have all the can inputs in a list to select functions for them. Im already doing the temps that way. But I want to be able to use the labels "Gearbox oil temp" and "Diff oil temp" because my own label dosent show up in logging, only AN volt ...
  6. I would like to be able to select functions for digital inputs via CAN. Like traction control disable switch. Also I would like to be able to select different temp inputs under Analoge voltage via external pullup resistor. I want to have diff and gearbox oil temp and already have used the four temp inputs.
  7. Could it be possible in the future to have user selectable internal pullup resistors on all analog inputs?
  8. Some pictures of my friends Volvo that I did the new engine swap in. The car is an rallycross supernational that competes in the Swedish rallycross championship. Its an Volvo S40 that is converted to rear wheel drive and had an Volvo (B230) 3.2 litre 16Valve N/A engine and an sequential gearbox. This winter I did the engine swap to an BMW S65B40 V8 engine with Link Extreme with full vanos control.
  9. I have the same problem after updating to the latest firmware. And every log have different HzÂ
  10. I tried that earlier but as soon as I released the launch button it disarmed. Today I tried again and configured an virtual aux with the timer and it works now. But I cant get the arming time to work it arms immediately whatever arming time I set.
  11. I have a rallycross car and wheelspeed sensors is not allowed. I would like to to have an option with an 3D table that is not speed sensitive. I want to use an voltage switch to choose different rpm and an timer on the other axis.
  12. Anyone have a base map for an BMW S65B40 with vanos control or which trigger setup should I use?
  13. Is it possible to add voltage for gear detection and not only speed? I don't have a speed sensor on my rallycross car but I have a gear position sensor 0-5v
×
×
  • Create New...