David Thomas1436215403

Great thanks. I'll give that a go when I get home tomorrow.

Hi, following on from my previous post, my car now starts. Idle is no good though, any tips for improving that? I have added the old G3+ file and the current G4 file to this post. Could someone please take a look and see what I've missed / forgotten to transfer across? I know I have the settings wrong on the 2 outputs to relays, but my old laptop which had the original map on has failed and I am now unable to check the new one against it. Many thanks in advancemr2-170322.pcl05april23.pcl Not 100% sure if the 170322 or this file was the G3+, been a while since I opened it!mr2-1342.pcl

Quick update, I altered the settings as you stated. The car now starts. Doesn't idle great but going to get a timing light and check that later. 12 month old fuel may not helping either! Many thanks for your help so far, I'm sure I'll be asking a few more questions as I get it more to where I want it to be

Great thanks. I'll give the above a go and get back to you

This is the file currently on the ecu. For some reason i can't get my very old laptop to start up, so can't get the data file off that at the moment. Will add the G3 file as soon as I can05april23.pcl Above was how the ecu was hard wired years ago. For some reason I now show IAT at -50deg, ECT at -50deg plus other things which seem wrong. As far as I can see I changed the inputs accordingly but obviously have gone wrong somewhere This is the ecu installed. And a picture of the engine im trying to get to run!

Hi, I did a firmware upgrade on my ecu about a year ago, didn't go well so just closed the garage on it. Decided to give it another try, is anyone on here able to take a look at the old g3 data file and compare it to the g4 one I tried doing. Let me know where I've gone wrong? Car is a 1990 mr2 turbo, was a good spec when built a long time ago. It was working OK on g3 but has been dead ever since the firmware upgrade. Have tried logging data but it shows zero rpm when cranking, and doesn't seem to send any ignition signals. Thanks in advance for any help!