Previously Igor Semynozhenko wrote:
Hello.
Â
The problem is as follows:
Car is EDM 2006 Subaru WRX STi with EJ257.
ECU installed is G4 Plug-in V10. AVCS is set up using all the base settngs from LINK start file.
Â
When car is logged, fully warmed up and >1200rpm (no AVCS lockouts) the AVCS shows 0* when the target is 15*.
Â
If the voltage @ AVCS sensor is measured using a voltmeter it shows 3V and no ground signal to the chassis, whereas the same STI with stock ECU shows 12V and ground is sensed to the chassis.
Â
Please help - where to look at?
Â
Sorry, actually I made a mistake in that post. It's still 12V as in normal STI but no signal through ground.
Â