Jump to content

Anaru

Members
  • Posts

    6
  • Joined

  • Last visited

    Never

Everything posted by Anaru

  1. Hi glenn... Im still learning myself , but im running 550 injecters in a rb 20, mines running pretty resonable ( reving out) Im just waiting for the dyno guy to tweak it properly...Im no expert but you can try what ive got so far????at the moment...ive set the base timming at 10* , with the ecu set at 0 .... then put the ecu at 27* .... fuel pressure rate at 40psi with vacum hose off at idle...master fuel at 32 ....fuel row 1 is 50% ...fuel row 2 is 36% ...fuel row 3 is 34% ...etc ... good luck..... the guys on here im sure will sort you out better than i can...but its somthing to try in the mean time.
  2. thanx simon, its a plug in play link....so it runs the straight into the holden loom....is there anything i need to do with the hand controler to get these injecters working?
  3. Can i run high impendence injecters? if so what do i need to do...if not, i do have a a "doofer" which came with the 550 injecters ...but i dont know where to wire it into ?....can anyone help . please
  4. Thanx simon, will come into your shop and see yous,as im comming down to christchurch in the next few months ...is there an upgrade needed to run a s14 toyota 2.4 superchager on a distributor nissan 6 ? been told i wont need a bov as it wont push over 14psi of boost ...more around the 8- 10 psi ...cheers for your help...
  5. thanx cameron,so what will this sub board i have run? and where abouts (town) can the swap be done ?
  6. http://i231.photobucket.com/albums/ee168/ima_sinnr/08_21_0.jpg main chip has D42V3 220900 rasied board haas no visable writting the larger of the two black chips has MC14557BCP FAU9742 the smaller one has HA17555 *8K4 any help would be great...
×
×
  • Create New...