I'm running a G4 plug in and I'm wiring up the Knock block. I noticed the harness does not plug into the stock knock sensor. The stock sensor also has one white wire coming out of it, and the Knock Block harness has two... a white and black. What do people usually do when using the the stock sensor?
I was also thinking of just using the Bosch sensor that comes in the kit so it would just plug in, but don't know what torque value to tighten the bolt to. Also does the orientation/angle in relation to the block matter like it does on the stock sensor?
Last question is now that I'm using the latest 4.8 firmware, I noticed I can't right click on a table and add or delete a column or row like you could on the 4.7? I tried to do it in the axis setup, but that proved to be much more difficult, because you have to change all the other columns. It's also difficult, because if it is the same value as the one next to it, or not in between, it won't let you. So you have to start from the far right, changing the columns working you way back to the one column you wanted to change/add. What am I missing here? Seemed a whole lot better on the old firmware.
Thanks!