Jump to content

Lauri Hellevuo

Members
  • Posts

    5
  • Joined

  • Last visited

    Never

Everything posted by Lauri Hellevuo

  1. I´m still having problems... Car is still revving at idle, starts about 1000rpm and ends to 1500rpm. When that is happening idle status is rpm lockout, Have tried to adjust that between 150-3000 rpm. Sometimes it works but usually no..also idle ignition control is off  Any ideas?  -Lauri
  2. Hi, Still trying to get stable idle with closed loop settings idle rpm is set to 990rpm but what should i put in the rpm lockout table? 990+150=1140? Or only 150rpm? When i was setting the base position stepper i noticed that isc cl trim does not change when you put base position map 1,5 or 2,0 Correction is about 0,2% now it is necessary use the idle ignition map? is the et throttle map correct it´s 1,5 in the idle area?  Thanks,  Lauri
  3. Hi, I can´t open file  See picture  -Lauri Â
  4. Hi, samekind of problems with my 2006 sti, Closed loop idle is really hard to adjust that car even idle. If you set e-throttle 1.0 to the map car idles 1500rpm. And what is very curious thing, when car is moving, gear neutral and gas pedal up idle is around 1000rpm what is set, when you stop idle will go up to 1500rpm. Can it be adjusted only with rpm? Have anybody got "base" map that suits allmost stock sti? Â -Lauri
  5. Hi! I have problem with idle settings. Idle is humping between 500-1500rpm. In meanwhile its quite ok but then it starts humping again. Could somebody send me a closed loop idle control settings, car is nearly stock  Thanks!
×
×
  • Create New...