Jump to content

sam main

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by sam main

  1. sam main

    s15 distributor

    Hello help from above im just installing a monsoon on my sr20de it had a distributor and leads but iv now installed coils so my question is can i use the dizy as a cas if so wot pins would i be using and would the trigger setup still be the same as nissain cas or do i have to bit the bullet and buy a cas
  2. hi ross im looking for a na stock ls1 ignition for g4+ any help would be much appreciated
  3. here somthing im confused about its working but when i select an temp 1 select ect the sensor type selection box end up in the aux 10 were my ecu power hold is selected this normal
  4. thanks again awesome support cheers Â
  5. just one last q befor i fire this beast in to life the ls trigger has a 8v a signal and a ground its that ground a ecu sensor ground or straight to the block also my ecu is now setup for power hold with the ignition in di3 and power hold in aux 10 is it safe to power it up and config the software quickly or will i need to power it up the original way and config it first cheers
  6. thank you very much for your help Â
  7. yer e36 convertion thanks for clearing that up how about the offset will i have set up some timing mark or is this automatic with this trigger type thanks
  8. hi guys bit of a newbe done some reserch on ls1 trigger and it seems thay r 24 tooth but none missing g4+ options are ls1 5- 10 and ls1 3-12 im gesing is nether so do i select muilti tooth and enter 24 but also ther is no external timing marks on the engine so how do i then sort the trigger offset no mark on the puly to check on a timing tight dose this mean the timing offset is just 0 and no need for timing light and how dose it no 360 has gone with no teeth missing is it from the 1 tooth cam trigger i have set up my m50 bmw from scratch and it made sens start to finish and started right up but i dont get this one keen to learn thanks guys
×
×
  • Create New...