Shaun Wilmer
Members-
Posts
13 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by Shaun Wilmer
-
Pull information from sensor Plugged in to a CANBUS Dash
Shaun Wilmer replied to Shaun Wilmer's topic in WishList
Just my luck, I bought one of the last G4 in the UK just before the G4+ came out ! Cheers Shaun -
Would it be possible to have a bi-directional connection with a mxl strada dash where additional sensors (such as brake pressure) are tranmitted back on a G4 Storm for datalogging. Shaun
-
AIM MXL RS232 connection does not work with G3/G4
Shaun Wilmer replied to Crispin's topic in Link G4
Having exactly the same issue. Aim can't even be bothered answering my emails to the support line Tried everything, even a full continuity check on the cable with no joy. Did you resolve the issue in the end ? I really need to fix this, I don't have any of the original dash in the car now. Shaun -
Cheers, I'll have wire it up that way.
-
I'm setting up the car using the speed sensors off the stock ABS wheel speed sensors on the car (FD3S) but I can't find the information what voltage I should use for driving the sensor. I don't know if they are just 5v or something else. Shaun
-
Parts have turned up, I'm in the process of pulling the wiring through to the bulkhead and come back to the manual on pg39/40. The sensor I have is the bosch 0280130026 and it has 2 pins, is the diagram to one of the pins and the other to the sensor ground ? Shaun
-
Parts ordered, thanks again )
-
Thanks, didn't find the right page in the manual. Will sort an NTC style sensor out for it. Shaun
-
I've just started wiring up a G4 Storm to a mazda rx7 FD3S. Reading through all the documentation the 2 main temp inputs are for the water and air temp, which I sorted with the sensors in the manual. I'd like to have the fuel temp as a correction too and was looking at using the AN-volt 4 input, but the manual says the difference between the temp and the an-volt is the temperature channels have an internal pull-up resister. Can somebody recommend the sensor and pull-up resister I can use to get this to work correctly. I'm looking at just using a wideband to free up the AN-volt 4 for use (manual shows wide and narrow band on ANvolt 3 & 4) Shaun
-
Hi, Just looking at options and wondered if the G4 is compatible with the Rx8 dash etc. Looking at the possibility of a RX8 with LPG. Cheers Shaun
-
I think Pip Gardner has Tuned LinkECU too. http://www.wgtautodevelopments.co.uk/ He is based in middlewich, so not as far as thor. Shaun
-
Great Was looking at gas injection. Didn't think the liquid injection was readily available. Cheers David ! Shaun
-
I'm looking at investigating running EFI on a mazda rotary on lpg and have had some discussions about using a Link ECU to control the injectors. The big issue was if the map could include fuel pressue as a varible. Has anybody else done this ? I'm currently running a Impco 350 LPG carb on the engine thats currently install in the car. The engine hasn't seen petrol in 18 months ! Thanks in advance ) Shaun