Jump to content

daniel verrall

Members
  • Posts

    3
  • Joined

  • Last visited

    Never

daniel verrall's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. hey i am running a gts link in my skyline r33 gts t i currently have the standard 2 bar sensor (the little black box) . now i had someone tune this ecu and am i right that the fuel maps run out at 14.7 psi ? can this ecu run more than that ? i also have a prob since i changed coils to new ones. as soon as hard boost comes on it leans right out and like cuts out didnt do it like that with old coils they just broke down thats why i changed them so i think it is the map sensor even though it checks ok voltages as so forth one time when i checked it i was gettin a fluxuating voltage from .4 up to 2 volts just at idle but i have not again had that same reading ,weird!!! i pulled the little black box (sensor) and looked at the board it looked a little corroded. when i run standard ecu it doesnt miss a beat so its something with the link ecu . so i am going to try a new map sensor 2.5 bar can anyone give me some insight on my problem please regaurds dan.
  2. hey it happens soon as you give it a boot full and as full boost comes on it only does this when running on link should i rejoin the track inside the ecu ? i dont know wat to do where should i go from here i have spent days on it
  3. hey guys wanting to know how to check the 2 bar map sensor it has three wires earth 12v and signal between wat two wires to you hook a ohms metre and '' wat is the map sensor supose to read '' to be in working order and does the gts link handle more than 16 pound of boost because maps run out at about that can u extent the maps ? can someone please help me would really appreciate it cheers!
×
×
  • Create New...