Daniel Livesey

I recently purchased a sand rail/ dune buggy with a Nissan VG30DET engine and a LinkPlus V14 ECU. I had to pull the motor to get the transmission fixed and all the factory wire harness simply unplugged. I put everything back together and it does not start, upon searching the Nissan forums I checked the coil packs and they do not have 12V going to them, this signal would normally come from the factory ecu and I am assuming now the LinkPlus. The fuel pump is working properly along with the 2 other relays that are wired with the unit. It started and ran fine before I took it apart and being new to something without a carburetor I am not sure where to start troubleshooting if it is in-fact something with the ecu. I did not receive any tuning module or PC link when I purchased the vehicle so I am unsure if maybe the mapping may have been lost. The battery was unhooked for about a month so I am not sure if this may have also had a negative effect on the ecu as well. I am located in Arizona, USA and I have noticed that this product is not too common around here. I am really scratching my head here and any help or direction you guys can provide would be great., additionally if you guys need more inoformation about anything I am happy to do my best to supply that. Here is the information on the unit SN010241 Link VG30 LPV141 181105 Thanks in Advance, Â Daniel Livesey