Hi all after a long build and now a new engine lve had to remove the password by reloading my link G4 storm. l also updated the firmware to the latest version. l reinstalled the Nissan R34 base map as this was the nearest to my car. But now it will not start. does anyone have a better base map for an Nissan Skyline RB 26 engine. Thanks for any help and lve added engine spec if that helps.
Nissan skyline R32 GTR spec
New N1 block bored to 87mm
Trust Greddy cooling line Pistons
Tomei Rods ARP Bolts
Fardon stroker crank
Nismo Bearings
Tomei oil pump
N1 water pump
ARP head bolts
ARP Exhaust manifold studs
Excedy Race Carbon Core D flywheel + Clutch
ATI Harmonic damper crank pulley
Cylinder head mild port and polish
std valves on 3 position seats
supertec duo springs titanium retainers
supertec valve guides
supertec valve stem seals
HKS cams 264deg 9.3mmlift in and out
HKS fine tune cam pulleys
Tomei 1.2mm MLS gasket
HKS 2530 twin turbos
HKS actuators
HKS Twin manifolds with link pipe.
HKS fuel rail
SARD Race Regulator
Bosch 044 fuel pump
Swirl Pot
700 injectors..............l also have 800 injectors if required