Jump to content

yellow munson

Members
  • Posts

    1
  • Joined

  • Last visited

    Never

Everything posted by yellow munson

  1. Ashley, We have a link plus on a 92 VR4 3000GT that was originally made for an eclipse. I sent the Ecu back to you and it was configured for the VR4. During the process of install, the ecu databoard was damaged and was sent back to you for repair and was repaired many months ago. However, the problem we are having is there is either a software problem or seems to be the ECU problem. We got this message on the computer....retrieve aquired prel3 error....incorrect number of bytes returned... and we also got the message...Link disconnected due to excess of aquire error. The symptoms on the car are: Ignition break up ( New ngk plugs gapped at 0.28, new plug wires) The inginition break up or "miss" does occur at above 16 PSI. However, when it does happen, it is not a constant miss, but more like a high load miss. The A/F ratio is between 11.6 and 11.7 across the board under boost. We also put a 116 octane race gas to see if the detonation problem would correct but it did not solve the problem. Could you please respond and also send a email to [email protected] Thank you for all your assistance. Brent Barrett
×
×
  • Create New...